Camera HD-TVI hình bán cầu hồng ngoại DS-2CE56D1T-IRMM
Camera HD-TVI bán cầu hồng ngoại 2MP
Cảm biến 1/2.7" Progressive Scan CMOS.
Độ phân giải 2MP :1930(H)*1088(V).
Độ nhạy sáng 0.1Lux.
Ống kính 3.6mm ( Đặt hàng: 6mm).
Góc trông rộng (90 độ với ống kính 3.6mm, 55.4 độ với ống kính 6mm).
Hồng ngoại thông minh Smart IR, tầm xa hồng ngoại 20m.
Chống nước tiêu chuẩn IP66. Có menu OSD có thể điều khiển từ xa qua cáp đồng trục.
Tính năng : Chống rung (Anti-flicker). Bù ngược sáng (BLC), giảm nhiễu số ( DNR), Bắt chuyển động ( Motion detection), Mặt nạ che ( Privacy Mask).
Nguồn vào 12 VDC.
Dải nhiệt hoạt động rộng (-40°~60°).
Hikvision DS-2CE56D1T-IRM 2MP resolution, CMOS sensor Output Turbo HD, up to 1080P resolution
Camera HD-TVI hemispherical infrared DS-2CE56D1T-IRMM
Camera HD-TVI hemisphere infrared 2MP
Sensor 1 / 2.7 "CMOS Progressive Scan.
2MP resolution: 1930 (H) * 1088 (V).
Sensitivity 0.1Lux.
3.6mm lens (Order: 6mm).
Angle looks wide (90 degree lens with 3.6mm, 6mm lens 55.4 degrees).
Infrared Smart IR, infrared 20m range.
Water resistant IP66 standards. Yes OSD can be controlled remotely via a coaxial cable.
Feature: Stabilization (Anti-flicker). Backlight Compensation (BLC), digital noise reduction (DNR), Getting motion (Motion detection), Masks cover (Privacy Mask).
Sources at 12 VDC.
Wide operating temperature range (-40 ° ~ 60 °).
Camera HD-TVI hemispherical infrared DS-2CE56D1T-IRMM
Camera HD-TVI hemisphere infrared 2MP
Sensor 1 / 2.7 "CMOS Progressive Scan.
2MP resolution: 1930 (H) * 1088 (V).
Sensitivity 0.1Lux.
3.6mm lens (Order: 6mm).
Angle looks wide (90 degree lens with 3.6mm, 6mm lens 55.4 degrees).
Infrared Smart IR, infrared 20m range.
Water resistant IP66 standards. Yes OSD can be controlled remotely via a coaxial cable.
Feature: Stabilization (Anti-flicker). Backlight Compensation (BLC), digital noise reduction (DNR), Getting motion (Motion detection), Masks cover (Privacy Mask).
Sources at 12 VDC.
Wide operating temperature range (-40 ° ~ 60 °).
Recommended: - To achieve the highest performance, avoid installing in place with strong light shining directly, avoiding drizzle position. - Do not touch directly on the lens and sensor. - When the blur using soft materials contain some chemicals to clean the lens and sensor dust. - Use the standard power supply, sufficient capacity, genuine. Overvoltage could damage Camer
TECHNOLOGY CORPORATION LONG VIETNAM ELECTRONICS TELECOMMUNICATIONS